Pielāgotu sadaļu iestatījumi viki pirmkods

Pēdējais mainījis Administrator 2011/11/06 20:09
Saturs · Komentāri (0) · Anotācijas (0) · Pielikumi (1) · Vēsture · Informācija
Slēpt rindu numurus
  1: {{include document="XWiki.ConfigurableClassMacros" /}}
  2: 
  3: {{velocity}}
  4: #*
  5:  * This part takes the configuration from any documents containing XWiki.ConfigurableClass objects and creates a form
  6:  * for each. To includeForm this document, you may specify:
  7:  *
  8:  * $section - String - The section which we are administrating eg: "Registration", "Users", or "Import".
  9:  *                     If none is specified then it checks for a request parameter called "section" and uses that,
 10:  *                     if no parameter, then this code assumes that it is part of the admin icons sheet and adds icons
 11:  *                     for any section which is not in $sections, in that event, this code assumes it is being run
 12:  *                     inside of a <ul> block.
 13:  *
 14:  * $sections - List<String> - If section is not specified, any sections on this list will not have icons made for them,
 15:  *                            the assumption being that the icons are already there. If section is specified then this
 16:  *                            is not taken into account and may safely be undefined.
 17:  *
 18:  * $currentDoc - String (document.fullName) - The administration document, users who don't have permission to edit
 19:  *                                            it will not be able to include applications (possibly injecting
 20:  *                                            arbitrary code.) if none specified then $doc.getFullName() is used.
 21:  *
 22:  * $globaladmin - boolean - If set true then we will assume we are administrationg the entire wiki.
 23:  *                          If not set then we look for a request parameter called "editor" if that exists and equals
 24:  *                          "globaladmin" then $globaladmin is true, if it doesn't exist then we check to see if
 25:  *                          $currentDoc.getFullName() equals "XWiki.XWikiPreferences".
 26:  *
 27:  * $doNotUnlockConfigurableDocuments - boolean - If true then this code will not make any attempt to unlock configurable
 28:  *                                               documents. By default it does because it locks any document in the
 29:  *                                               section which is being configured which would lead to a lot of stray
 30:  *                                               locks if they weren't all canceled. Only recommended if this page is
 31:  *                                               being included twice in the same page.
 32:  *###
 33: ##
 34: ## Form submission depends on this.
 35: $xwiki.jsfx.use('js/xwiki/actionbuttons/actionButtons.js', true)
 36: ##
 37: #if(!$section)
 38:   #set($section = $request.getParameter('section'))
 39: #end
 40: #if(!$currentDoc)
 41:   #set($currentDoc = $doc.getFullName())
 42: #end
 43: ## Get value of $globaladmin if not specified.
 44: #if("$!globaladmin" == '')
 45:   #if($editor != 'globaladmin'
 46:       && $request.getParameter('editor') != 'globaladmin'
 47:       && $currentDoc != 'XWiki.XWikiPreferences')
 48:   ##
 49:     #set($globaladmin = false)
 50:   #else
 51:     #set($globaladmin = true)
 52:   #end
 53: #end
 54: #set($currentSpace = $xwiki.getDocument($currentDoc).getSpace())
 55: ##
 56: ## This application should not run with programming rights because it evaluates code which may not be trustworthy.
 57: ## Removing the next line will open a security hole.
 58: $doc.dropPermissions()##
 59: ##
 60: ## This application locks every document in a section while that section is being edited so we should
 61: ## check for locks held by the current user on any of the applications configured here and remove them.
 62: #if(!$doNotUnlockConfigurableDocuments)
 63:   #set($outputList = [])
 64:   #findNamesOfAppsToConfigure("", $globaladmin, $currentSpace, $outputList)##
 65:   ## We don't want to generate javascript which unlocks the current document just after we got finished locking it.
 66:   #set($discard = $outputList.remove($currentDoc))
 67:   #unlockDocuments($outputList)
 68: #end
 69: ##
 70: ##------------------------------------------------------------------------------------------------------------
 71: ## If $section exists then we are viewing the admin page for a particular section.
 72: ## eg: 'Registration', 'Presentation', 'Import' etc.
 73: ##------------------------------------------------------------------------------------------------------------
 74: ##
 75: #if($section && $section != '')
 76:   ##
 77:   ## This is for keeping track of whether we have shown the heading yet or not.
 78:   ## If the heading doesn't need to be shown, but an error occurs in processing, then we show the heading
 79:   ## so that the user knows what the error relates to.
 80:   #set($headingShowing = false)
 81:   ##
 82:   ## Searches the database for names of apps to be configured
 83:   #set($outputList = [])
 84:   #findNamesOfAppsToConfigure($section, $globaladmin, $xwiki.getDocument($currentDoc).getSpace(), $outputList)
 85:   ##
 86:   #foreach($appName in $outputList)
 87:     ##
 88:     ## Make sure the current user has permission to edit the configurable application.
 89:     #set($userHasAccessToDocument = $xcontext.hasAccessLevel('edit', $appName))
 90:     ##
 91:     ## If the document was not last saved by a user with edit privilege on this page
 92:     ## then we can't safely display the page but we should warn the viewer.
 93:     #if($userHasAccessToDocument)
 94:       ## Get the configurable application
 95:       #set($app = $xwiki.getDocument($appName))
 96:       ##
 97:       #set($documentSavedByAuthorizedUser = false)
 98:       #checkDocumentSavedByAuthorizedUser($app, $currentDoc, $documentSavedByAuthorizedUser)
 99:     #end
100:     ##
101:     ## There is no need to display a heading unless:
102:     ## 1. There was already a section before this document.
103:     ## 2. This is not the first document in this section.
104:     ##
105:     ## If we are displaying the heading and there is an error to be shown Javascript will not strip the heading.
106:     #if(!$appName.equals($outputList.get(0)) || $sections.contains($section))
107:       ## Create a document heading.
108:       #showHeading($appName, $headingShowing)
109:     #end
110:     ##
111:     #if(!$userHasAccessToDocument)
112:       #showHeading($appName, $headingShowing)
113: 
114:       {{error}}$msg.get('xe.admin.configurable.noPermissionThisApplication'){{/error}}
115: 
116:     #elseif(!$documentSavedByAuthorizedUser)
117:       #showHeading($appName, $headingShowing)
118: 
119:       {{error}}$msg.get('xe.admin.configurable.applicationAuthorNoAdmin', [$app.Author]){{/error}}
120: 
121:     ##
122:     ##------------------------------------------------------------------------------------------------------------
123:     ## If the document is locked and not by the current user and forceEdit is not set true,
124:     #elseif($app.getLocked() && $app.getLockingUser() != $xcontext.getUser() && !$request.getParameter('forceEdit'))
125:       #set($requestURL = "$request.getRequestURL()")
126:       #if($requestURL.indexOf('?') == -1)
127:         #set($requestURL = "${requestURL}?")
128:       #end
129:       #showHeading($appName, $headingShowing)
130: 
131:       {{error}}$msg.get('doclockedby') $app.getLockingUser() [[$msg.get('forcelock')>>${requestURL}&forceEdit=1]]{{/error}}
132: 
133:     #else
134:       ## If the document is not already locked, attempt to acquire the lock.
135:       #if(!$app.getLocked())
136:         ## Try to use an AJAX call to lock the document.
137: 
138:         {{html wiki=true}}
139:           <noscript>
140: 
141:             {{warning}}$msg.get('xe.admin.configurable.cannotLockNoJavascript'){{/warning}}
142: 
143:           </noscript>
144:           <script type="text/javascript">
145:             document.observe("xwiki:dom:loaded", function() {
146:               new Ajax.Request("$xwiki.getURL($app.getFullName(), 'lock', 'ajax=1')");
147:             });
148:           </script>
149:         {{/html}}
150:         #set($discard = $lockedDocumentNames.add($app.getFullName()))
151:       #end
152:       ##------------------------------------------------------------------------------------------------------------
153:       ## Done Locking.
154:       ##
155:       ## Get all objects of the "ConfigurableClass" from this document.
156:       #set($allConfigurableObjs = $app.getObjects($nameOfThisDocument))
157:       ## Separate out the objects which are for this section.
158:       #set($configurableObjs = [])
159:       #foreach($configurableObj in $allConfigurableObjs)
160:         #if($app.getValue('displayInSection', $configurableObj) == $section)
161:           ## If this is space admin, then don't display global, if global don't display space.
162:           #if($globaladmin == ($app.getValue('configureGlobally', $configurableObj) == 1))
163:             #set($discard = $configurableObjs.add($configurableObj))
164:           #end
165:         #end
166:       #end
167:       #if($configurableObjs.size() == 0)
168:         ## Internal error, not translated.
169:         #showHeading($appName, $headingShowing)
170: 
171:         {{error}}Internal error: All objects were filtered out for application: $appName.{{/error}}
172: 
173:       #else
174:         #set($formAction = $xwiki.getURL($app.getFullName(), 'save'))
175:         #set($formId = "${section.toLowerCase()}_${app.getFullName()}")
176:         #set($escapedAppName = $escapetool.xml($app.getFullName()))
177:         #foreach($configurableObj in $configurableObjs)
178:           ## Display the header if one exists.
179:           #set($heading = $app.getValue('heading', $configurableObj))
180:           #if($heading && $heading != '')
181:             == #evaluate($heading) ==
182:           #end
183:           ##
184:           #set($codeToExecute = "$!app.getValue('codeToExecute', $configurableObj)")
185:           #if($codeToExecute != '')
186:             (%class="codeToExecute"%)(((##
187:               #evaluate($codeToExecute)##
188:             )))
189:           #end
190:           ##
191:           ## If propertiesToShow is set, then we will only show the properties contained therein.
192:           #set($propertiesToShow = $app.getValue('propertiesToShow', $configurableObj))
193:           #if(!$propertiesToShow || $propertiesToShow.getClass().getName().indexOf('List') == -1)
194:             #set($propertiesToShow = [])
195:           #end
196:           ##
197:           ## If linkPrefix is set, then we will make each property label a link which starts with that prefix.
198:           #set($linkPrefix = "$!app.getValue('linkPrefix', $configurableObj)")
199:           ##
200:           ## If the Configurable object specifies a configuration class, use it,
201:           ## otherwise assume custom forms are used instead.
202:           #set($configClassName = "$!app.getValue('configurationClass', $configurableObj)")
203:           #if($configClassName != '')
204:             #set($objClass = $xwiki.getDocument($configClassName).getxWikiClass())
205:             #if(!$objClass || $objClass.getClass().getName().indexOf('.Class') == -1)
206:               #showHeading($appName, $headingShowing)
207: 
208:               {{error}}$msg.get('xe.admin.configurable.configurationClassNonexistant'){{/error}}
209: 
210:             #else
211:               ## Use the first object from the document which is of the configuration class.
212:               #set($obj = $app.getObject($objClass.getName()))
213:               ##
214:               #if(!$obj || $obj.getClass().getName().indexOf('.Object') == -1)
215:                 #showHeading($appName, $headingShowing)
216: 
217:                 {{error}}
218:                   $msg.get('xe.admin.configurable.noObjectOfConfigurationClassFound', [$objClass.getName(), $app.getFullName()])
219:                 {{/error}}
220: 
221:               #else
222:                 ##
223:                 ## Merge save buttons, remove headings from subsections, and make information links into popups.
224:                 ## This is not done if there is only a custom defined form.
225:                 $xwiki.jsx.use($nameOfThisDocument)##
226:                 ##
227:                 ## We don't begin the form until we have content for it so that a configurable can specify a
228:                 ## custom form in codeToExecute and if that configurable object is the first of it's kind in that
229:                 ## document, the custom form will not be put inside of our form.
230:                 #if(!$insideForm)
231:                   ## We are opening a form and fieldset without closing it, thus we cannot clean this html.
232: 
233:                   {{html clean=false}}
234:                     <form id="$formId" method="post" action="$formAction" class="xform half">
235:                       <fieldset>
236:                   {{/html}}
237:                   #set($insideForm = true)
238:                 #end
239: 
240:                 {{html}}
241:                   $formHtml.toString()
242:                 {{/html}}
243:               #end## If object exists
244:             #end## If class exists
245:           #end## If class name is specified.
246:         #end## Foreach configurable object found in this document
247:         ## If a form was started then we end it.
248:         #if($insideForm)
249: 
250:           ## This is closing an open form which was opened above, we cannot clean this html.
251:           {{html clean=false}}
252:           ## We add in a redirect field to prevent the user from being carried away when they save
253:           ## if they don't have javascript.
254:           #set($thisURL = $request.getRequestURL())
255:           #if($request.getQueryString() && $request.getQueryString().length() > 0)
256:             #set($thisURL = "${thisURL}?$request.getQueryString()")
257:           #end
258:           <input type="hidden" id="${escapedAppName}_redirect" name="$redirectParameter" value="$escapetool.xml($thisURL)" />
259:           <input type="hidden" name="form_token" value="$!{services.csrf.getToken()}" />
260:           </fieldset>
261:           <div class="bottombuttons">
262:             <p class="admin-buttons">
263:               <span class="buttonwrapper">
264:                 ## Text to display on the button. If there is a heading then this button should be labeled
265:                 ## that it is for saving this section. Otherwise it should be a generic "save" button.
266:                 #if($headingShowing)
267:                   #set($buttonText = "$msg.get('admin.save') $escapedAppName")
268:                 #else
269:                   #set($buttonText = "$msg.get('admin.save')")
270:                 #end
271:                 <input class="button" type="submit" name="action_saveandcontinue" value="$buttonText" />
272:               </span>
273:             </p>
274:           </div> ## bottombuttons
275:           </form>
276:           #set($insideForm = false)
277:           {{/html}}
278:         #end
279:       #end## If there are configurable objects
280:     #end## If document is not locked or forceEdit is enabled
281:   #end## Foreach document name in names to configure
282: 
283:   {{html}}
284:   <script type="text/javascript">
285:   /* <![CDATA[ */
286:   ## Alt+Shift+S presses the first saveAndContinue button it finds, not what we want so we will disable edit shortcuts.
287:   document.observe('xwiki:dom:loaded', function() {
288:     XWiki.actionButtons.EditActions = Object.extend(XWiki.actionButtons.EditActions, {addShortcuts : function() { }});
289:   });
290:   //]]>
291:   </script>
292:   {{/html}}##
293:   ##
294: #else
295:   ##
296:   ##------------------------------------------------------------------------------------------------------------
297:   ## If section is not set then we are viewing the main administration page.
298:   ##------------------------------------------------------------------------------------------------------------
299:   ##
300:   ## If there is no list called sections then we set sections to an empty list.
301:   #if(!$sections || $sections.getClass().getName().indexOf('List') == -1)
302:     #set($sections = [])
303:   #end
304:   ##
305:   ## We have to create a list of documents which the current user doesn't have permission to view.
306:   ## So we can add an error message to the bottom of the page if there are any.
307:   #set($appsUserCannotView = [])
308:   ##
309:   ## A list of sections (to be added) which the user is not allowed to edit, icons will be displayed with a message
310:   #set($sectionsUserCannotEdit = [])
311:   ## List of sections to be added, in order by creationDate of oldest contained application.
312:   #set($sectionsToAdd = [])
313:   ## Map of URL of icon to use by the name of the section to use that icon on.
314:   #set($iconBySection = {})
315:   ##
316:   #set($outputList = [])
317:   #findNamesOfAppsToConfigure("", $globaladmin, $currentSpace, $outputList)
318:   ##
319:   #foreach($appName in $outputList)
320:     ##
321:     ## Get the configurable application
322:     #set($app = $xwiki.getDocument($appName))
323:     ##
324:     ## If getDocument returns null, then warn the user that they don't have view access to that application.
325:     #if(!$app)
326:       #set($discard = $appsUserCannotView.add($appName))
327:     #end
328:     ##
329:     #set($configurableObjects = $app.getObjects($nameOfThisDocument))
330:     #foreach($configurableObject in $configurableObjects)
331:       #set($displayInSection = $app.getValue('displayInSection', $configurableObject))
332:       ##
333:       ## If there is no section for this configurable or if the section cannot be edited, then check if the
334:       ## application can be edited by the current user, if so then we display the icon from the current app and
335:       ## don't display any message to tell the user they can't edit that section.
336:       #if(!$sections.contains($displayInSection) || $sectionsUserCannotEdit.contains($displayInSection))
337:         ##
338:         ## If there is no section for this configurable, then we will have to add one.
339:         #if(!$sections.contains($displayInSection) && !$sectionsToAdd.contains($displayInSection))
340:           #set($discard = $sectionsToAdd.add($displayInSection))
341:         #end
342:         ##
343:         ## If an attachment by the filename iconAttachment exists and is an image
344:         #set($attachment = $app.getAttachment("$app.getValue('iconAttachment', $configurableObject)"))
345:         #if($attachment && $attachment.isImage())
346:           ## Set the icon for this section as the attachment URL.
347:           #set($discard = $iconBySection.put($displayInSection, $app.getAttachmentURL($attachment.getFilename())))
348:         #end
349:         ##
350:         ## If the user doesn't have edit access to the application, we want to show a message on the icon
351:         #if(!$xcontext.hasAccessLevel("edit", $app.getFullName()))
352:           #if(!$sectionsUserCannotEdit.contains($displayInSection))
353:             #set($discard = $sectionsUserCannotEdit.add($displayInSection))
354:           #end
355:         #elseif($sectionsUserCannotEdit.contains($displayInSection))
356:           ## If the user didn't have access to the section before but does have access to _this_ app which is
357:           ## configured in the section, then the section becomes accessible.
358:           #set($discard = $sectionsUserCannotEdit.remove($displayInSection))
359:         #end
360:       #end## If section doesn't exist or user doesn't have access.
361:     #end## Foreach configurable object in this app.
362:   #end## Foreach application which is configurable.
363:   ##
364:   ## Now we go through sectionsToAdd and generate icons for them
365:   #set($defaultIcon = $xwiki.getAttachmentURL($nameOfThisDocument, 'DefaultAdminSectionIcon.png'))
366:   #if($globaladmin)
367:     #set($queryString = "editor=globaladmin&amp;section=")
368:   #else
369:     #set($queryString = "space=${currentSpace}&amp;section=")
370:     #if($request.getParameter('editor'))
371:       #set($queryString = "editor=$escapetool.url($request.getParameter('editor'))&amp;$queryString")
372:     #end
373:   #end
374: 
375:   ## This is an html fragment and thus cannot be cleaned
376:   {{html clean=false}}
377:   #foreach($sectionToAdd in $sectionsToAdd)
378:     #set($icon = $iconBySection.get($sectionToAdd))
379:     #if(!$icon)
380:       #set($icon = $defaultIcon)
381:     #end
382:     <li class="$escapetool.xml($sectionToAdd).replaceAll(' ', '_')">
383:       #set($hasAccess = !$sectionsUserCannotEdit.contains($sectionToAdd))
384:       #if($hasAccess)
385:         <a href="$xwiki.getURL($currentDoc, $xcontext.getAction(), "$queryString$escapetool.url($sectionToAdd)")">
386:       #else
387:         <a title="$msg.get('xe.admin.configurable.sectionIconNoAccessTooltip')">
388:       #end
389:       <span>
390:       <img src="$icon" alt="$escapetool.xml($sectionToAdd) icon"/>
391:       ## Try to translate the names of the sections, build the key by adding an "admin." in front. 
392:       ## Not the best way to translate, but very inline with the way the translations are done in XWiki.AdminSheet for individual administration page titles.
393:       ## If there is no translation (translated message is equals to key), don't display the message key, but the section name instead.
394:       #if($msg.get("admin.${sectionToAdd.toLowerCase()}") != "admin.${sectionToAdd.toLowerCase()}") 
395:         #set($sectionDisplayName = $msg.get("admin.${sectionToAdd.toLowerCase()}")) 
396:       #else
397:         #set($sectionDisplayName = $sectionToAdd)
398:       #end
399:       $escapetool.xml($sectionDisplayName)
400:       </span>
401:       #if(!$hasAccess)
402:         <br/><span class="errormessage">$msg.get('xe.admin.configurable.sectionIconNoAccess')</span>
403:       #end
404:       </a>
405:     </li>
406:   #end
407:   {{/html}}
408: 
409:   ## Finally we display an error message if there are any applications which we were unable to view.
410:   #if($appsUserCannotView.size() > 0)
411: 
412:     {{error}}$msg.get('xe.admin.configurable.noViewAccessSomeApplications', [$appsUserCannotView]){{/error}}
413: 
414:   #end
415: #end## If we should be looking at the main administration page.
416: {{/velocity}}